ar8840p3000ff

Remove/install engine hood

Tipo ar · tema 88.40 · versão 0101 · 2005-09-05

Válido para: MODEL 454.0

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 3 Carroçaria › 88 Peças acopladas, tampas externas › 88.40 Capô do motor, tampa frontal — Série 454 (modelos 0**)

EinPAS 35 Carroçaria/chassi/peças agregadas › 35.36 Capô/portinhola/tampa › 35.36.30 Capô do motor — Série 454 (modelos 0**)

AR88.40-P-3000FF

Remove/install engine hood

16.10.03

MODEL 454.0

Remove/install engine hood

P88.40-2419-05

1 Engine hood

2 Bolts

Remove/install

Danger!

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

When moving components, ensure that no body parts or limbs are within the operating range of moving parts.

AS00.00-Z-0011-01A

1

Open engine hood (1)

2

Unscrew bolts (2) from engine hood (1)

Before loosening bolts (2) mark installation position.

Installation: Ensure that engine hood (1) fits properly, if necessary:

Adjust engine hood (1)

AR88.40-P-3020FF

3

Remove engine hood (1)

Helper required

4

Install in the reverse order

5.1

Install air intake grate

When replacing engine hood (1) on vehicles up to production date 5.6.05 or on customer request on vehicles as of production date 6.6.05.

Retrofit air inlet grate

AZ88.40-P-0002FF

Documentos referenciados