AR82.62-P-7836TA | Removing and installing loudspeakers in rear shelf | 15.11.02 |
MODEL 211.0 with CODE (540a) Electric roller blind for rear window
P68.30-2675-08
1 Rear shelf paneling
2 Body-bound rivet
3 Electrical connector
6 Rear loudspeaker cover
7 Electric roller blind
4 Nut
5 Screw
P82.62-2417-08
Illustrated with code (810) sound system
8 Speaker housing
9 Electrical connector (with code (810) sound system)
10 Retaining clip
11 Wiring harness
H4/17x1 Bass speaker connector 1
H4/17x2 Bass speaker connector 2
H4/7 Left rear speaker (with code (810) sound system)
H4/8 Right rear speaker (with code (810) sound system)
H4/17 Bass module speaker
| Remove/Install | ||
1 | Remove paneling at both C-pillars | Do not detach belt end fitting. | |
2 | Remove spreading rivets (2) | ||
3 | Unscrew nuts (4) and bolts (5) from electric roller blind (7) | Accessible from trunk. | |
4 | Lift rear shelf paneling (1) and unclip cover of rear speaker (6) | ||
5 | Disconnect bass module speaker connector 1 (H4/17x1) and bass module speaker connector 2 (H4/17x2) from bass module speaker (H4/17) | ||
6.1 | Disconnect electrical connectors (9) from left rear speaker (H4/7) and right rear speaker (H4/8) | On vehicles with code (810) Sound System | |
7 | Take off retaining clips (10) and remove wiring harness (11) from speaker housing (8) | ||
8 | Twist speaker housing (8) counterclockwise until it is unlocked | ||
9 | Lift rear shelf paneling (1), pull forwards together with the speaker housing (8) and take out speaker housing (8) | Pay attention to insulating mat beneath the rear shelf paneling (1) and the electrical connector (3). | |
10 | Install in the reverse order |