P82.60-5083-06
Shown on vehicle with COMAND APS USA (with navigation system), code 530 and with comfort automatic air conditioning, code 581
1 Long wedge
2 Instrument panel center section
3 Locking rails
4 Bolts
5 Lugs
6 Antenna plug
7 Connector
8 Rail
A40/3 COMAND operating, display and controller unit
Modification notes
26.7.06 | Disconnect/connect ground line for battery and carry out basic programming removed | Steps 2 and 11 |
| Remove/install | ||
| Notes on avoiding damage to electronic components due to electrostatic discharge | ||
1 | Read out coding of COMAND operating, display and controller unit (A40/3) or of radio | Only when installing a new device and if the coding can still be read out with STAR DIAGNOSIS. | |
| Connect STAR DIAGNOSIS and read out fault memory | ||
STAR DIAGNOSIS diagnosis system | |||
2 | Unclip center part of instrument panel (2) using long wedge (1), remove and put down on the center console | Place on a soft underlay, as otherwise the center part of instrument panel (2) and/or the center console can be damaged. | |
Installation: First, insert the center part of the instrument panel (2) with the two lower notches into the lugs (5), then fold upwards and clip in. | |||
Long wedge | |||
3 | Remove screws (4) and slide the locking rails (3) all the way to the bottom (arrows A) | ||
4 | Pull out COMAND operating, display and controller unit (A40/3) or the radio | ||
5 | Unlock and disconnect antenna plugs (6) and connectors (7). | The number and geometry of the antenna plugs (6) and the connectors (7) can vary depending on the type of radio. | |
6 | Remove COMAND operating, display and controller unit (A40/3) or the radio | ||
7 | Slide carrier (8) to the right (arrows B) and remove forwards (arrow C) | Only when installing a new device. | |
8 | Install in the reverse order | ||
9 | Code COMAND operating, display and controller unit (A40/3) or the radio | Only when installing a new device. | |
| Connect STAR DIAGNOSIS and read out fault memory | ||
STAR DIAGNOSIS diagnosis system |
Long wedge
115 589 03 59 00
Commercially available tools
Documentos referenciados
- ad0000p200004a Conectar o STAR DIAGNOSIS, fazer a leitura da memória de falhas
- ad0000p200004a
- ah5400p000101a Indicações para evitar danos em componentes eletrônicos através de descargas eletrostáticas