ar8230p6951ff

Remove/install windshield wiper arm

Tipo ar · tema 82.30 · versão 0100 · 2004-01-19

Válido para: MODELS 454.0

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 3 Carroçaria › 82 Instalação elétrica, carroçaria › 82.30 Limpador do pára-brisa — Série 454 (modelos 0**)

EinPAS 36 Visão › 36.30 Limpar/lavar › 36.30.50 sistema limpador dos vidros — Série 454 (modelos 0**)

AR82.30-P-6951FF

Remove/install windshield wiper arm

29.10.03

MODELS 454.0

Remove/install windshield wiper arm

P82.30-2319-11

1 Wiper arm

2 Nut

3 Cap

Remove

Danger!

Risk of injury in the form of trapping or crushing, or even severing of limbs, if caught in windshield wiper mechanism

Always remove ignition key when working on windshield wiper mechanism.

AS82.30-Z-0001-01A

1

Unclip and remove caps (3)

2

Unscrew nut (2)

3

Remove wiper arms (1)

Install

4

Move wiper motor to limit position

Switch ignition on, switch wiper system to setting "1" and then off again, wait until wiper motor stops, then switch ignition off.

5

Fit wiper arms (1)

Note installation position of wiper arms (1).

6

Tighten nut (2)

*BA82.30-P-1001-01G

7

Fit caps (3)

8

Perform function check

Windshield wiper

Number

Designation

Type
454.0

BA82.30-P-1001-01G

Nut for wiper arm on wiper shaft

Nm

25

Documentos referenciados