P82.20-2735-07
Shown on vehicles with Parktronic system (PTS), code 220
1 Electrical connector
2 Clamps
3 Electrical connector
A44/3 Rear PTS warning indicator dome lamp
E15/3 Left dome lamp, 3rd seat row
| Remove/Install | ||
1 | Switch off ignition and remove the transmitter key from the EIS [EZS] control unit | On vehicles with Keyless Go, code 889: Press Keyless Go start/stop button repeatedly until the ignition is switched off. Remove transmitter key from vehicle and store it in a location beyond its transmission range (at least 2 m). | |
2.1 | Unclip rear dome lamp PTS warning indicator (A44/3) towards right (arrow A) and then lower to remove (arrow B) | Only for vehicles with Parktronic system (PTS), code 220. | |
Treat ribbon cable carefully to prevent damage. | |||
3.1 | Disconnect electrical connector (1) of the rear dome lamp PTS warning indicator (A44/3) | Only for vehicles with Parktronic system (PTS), code 220. | |
4 | Carefully unclip left dome lamp, 3rd seat row (E15/3) at the clips (2) and remove | Treat ribbon cable carefully to prevent damage. | |
Long wedge | |||
5 | Disconnect electrical connector (3) of the left dome lamp, 3rd seat row (E15/3) | ||
6 | Install in the reverse order |
Long wedge
115 589 03 59 00