ar8210p0004tx

Remove/install front axle level sensors

Tipo ar · tema 82.10 · versão 0100 · 2005-05-20

Válido para: MODELS 219.3 with CODE (615) Bi-xenon headlamp unit with integrated curve illumination

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 3 Carroçaria › 82 Instalação elétrica, carroçaria › 82.10 Iluminação externa — Série 219 (modelos 3**)

EinPAS 30 Sistema de iluminação › 30.15 Iluminação externa › 30.15.12 Sensor/interruptor/chicote — Série 219 (modelos 3**)

AR82.10-P-0004TX

Remove/install front axle level sensors

23.12.04

MODELS 219.3 with CODE (615) Bi-xenon headlamp unit with integrated curve illumination

Remove/install front axle level sensors

P82.10-4034-07

1 Nut

2 Pin

3 Nut

B22/2 Front axle level sensor

4 Electrical connector

5 Bracket

6 Bolts

Remove/Install

1

Raise vehicle with lifting platform

AR00.60-P-1000TX

2

Counterhold pin (2) and unscrew nut (1)

Replace self-locking nut (1).

3

Unscrew nut (3) and concealed nut (arrow)

Replace self-locking nut (3) and self-locking concealed nut (arrow).

4

Disconnect electrical connector (4) and remove front axle level sensor (B22/2)

5.1

Unscrew bolts (6) and remove
bracket (5)

Only when replacing the front axle level sensor (B22/2).

Replace self-locking bolts (6).

6

Install in the reverse order

7

Check the adjustment of the left front lamp unit and the right front lamp unit, correct if necessary.

Check and correct headlamp setting

AP82.10-P-8260TX

Documentos referenciados