1 Window lift
2 Slider
3 Pop rivet mounting holes
4 Retainer
5 Window lift rail
6 Crank operated window
7 Pop rivet, 4.8 mm
P72.12-0204-03
| Removal, installation | ||
1 | Remove door liner on rear door | ||
2 | Pull foil off of inner door panel | Before installing foil check window lift for easy motion | |
3 | Unclip retainer (4) from window lift rail (5) | ||
4 | Extend crank operated window (6) toward rear out of slider (2) with window lift rail (5) and push upwards in window guide rail | Secure against falling with installation wedge | |
5 | Drill out pop rivets (4 each) | To drill out: use 4.8 mm dia. bit | |
6 | Unhook window lift from inner door panel with installation hook and remove through installation opening | On vehicles with power windows: disconnect connector | |
7 | Reinstall in opposite order |
110 589 03 59 00
Installation wedge