Adjust rear door

AR72.12-P-0650F

Adjust rear door

19.1.95

Adjust

1

Remove striker eye (2)

2

Check gap dimensions at door all the way around



Gaps dimensions at hoods, doors and covers

*129589032100

Model 210.0

AR60.00-P-0700-01F

Model 210.2

AR60.00-P-0700-01FA

3

Loosen bolts (5) on B-pillar, tighten and adjust by moving rear door, adjust gaps



 After adjustment seal rear door hinge on B-pillar

*BA72.12-P-1001-01A

4

Loosen bolts (3), tighten and adjust contour on hinge side by moving rear door



Door paneling (D) should be flush with the driver's door contour or should be located max. 1 mm deeper

*BA72.12-P-1001-01A

5

Bolt on striker eye

 Do not tighten

6

Close rear door completely and adjust contour on striker eye by moving striker eye

Door paneling (E) should be flush with the contour of the rear fender or should extend max. 1 mm

7

Tighten striker eye



*BA72.12-P-1003-01A

8

Check contour and fit on window frame (F) to roof paneling and rear pillar, adjust if necessary

 The outer sealing of the door sealing frame should be flush with the edge of the roof paneling

9

Check rear door for easy motion

Number

Designation

Model
210.0

Model
210.2

BE60.00-P-1002-01A

Gap dimension

Front door to A-pillar

Dimension "B"

mm

6.5 (0.5)

6.5 (0.5)

Front door to fender

Dimension "H"

mm

4.5 (0.5)

4.5 (0.5)

Front door to rear door

Dimension "I"

mm

5.5 (0.5)

5.5 (0.5)

Front door to roof

Dimension "C"

mm

6.5 (0.5)

6.5 (0.5)

Rear door to upper side section

Dimension "D"

mm

6.5 (0.5)

-

Rear door to lower side section

Dimension "J"

mm

4.0 (0.5)

4.0 (0.5)

Fender to A-pillar

Dimension "Q"

mm

-

-

Front door to rear fender

Dimension "P"

mm

-

-

Fig., see

AR60.00-P-0700-01F

AR60.00-P-0700-01FA

Number

Designation

Model 210 except 210 with code 979, Z04, Z06

BA72.12-P-1001-01A

Bolts to door hinge

Nm

37

BA72.12-P-1003-01A

Bolts to striker eye

Nm

32