P68.30-3441-09
Shown with TIREFIT equipment
1 Rear center section paneling
2 Clip
5 Nut
6 Spare tire well paneling
7 Vehicle jack
3 Mount
4 Mount
| Remove/install | ||
1 | Lift luggage compartment floor paneling | ||
2 | Remove vehicle jack (7) | ||
3 | Pull spare wheel well panel (6) on rear center section paneling (1) to side in area of right nut (5) | When equipped with TIREFIT. | |
4 | Loosen nut (5) until rear center section paneling (1) is accessible | ||
5 | Unclip rear center section panel (1) and remove upward | Installation: Check clips (2) for damage, replace if necessary. Carefully position rear center section panel (1) in area of mounts (3, 4) to prevent damaging rear center section paneling (1). | |
| |||
6 | Install in the reverse order |
Mounting wedge
110 589 03 59 00