Shown on left
1 Side paneling
2 Expansion clip
3 Nut
4 Insulation mat
5 Edge guard
P68.30-3045-03
| Removal/installation | ||
1 | Remove left and right rear seat cushion | ||
2 | Remove expansion clip (2) | ||
3 | Fold over insulating mat (4) and unscrew nut (3) | ||
4 | Remove edge guard (5) in area of side paneling (1) | ||
5 | Unclip side paneling (1) from C-pillar | Installation: Position retaining clips on C-pillar, if necessary replace defective retaining clips. | |
6 | Install in the reverse order |