ar6830p430511tx

Install emergency call system wiring harness in headliner

Tipo ar · tema 68.30 · versão 0101 · 2010-03-29

Válido para: MODEL 219.3 with CODE (358) TELE AID with CODE (359) TELE AID emergency call system

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 3 Carroçaria › 68 Acabamento interno › 68.30 Revestimentos, frisos — Série 219 (modelos 3**)

EinPAS 25 Rede de bordo/rede/multifunções › 25.25 Chicote principal › 25.25.27 Chicote do teto — Série 219 (modelos 3**)

AR68.30-P-4305-11TX

Install emergency call system wiring harness in headliner

Repair materials

Number

Designation

Order number

BR00.45-Z-1071-02A

Adhesive tape roll, gray Tesa tape, 50 meters 0.3X50, 236 mm

A 001 989 17 85

Install emergency call system wiring harness in headliner

P68.30-3074-06

Shown with code (414) Electric glass tilting/sliding roof

1 Route emergency call system wiring harness (1) starting at overhead control panel retaining frame (5) as illustrated

The emergency call system wiring harness (1) thereby makes direct contact to the overhead control panel wiring harness (4) over the entire length.The emergency call system wiring harness (1) has a colored marking (arrow). This marking (arrow) should be located on the retainer tab (3) on the overhead control panel retaining frame (5) as illustrated.

2 Fasten emergency call system wiring harness (1) to headliner (2) with strips of adhesive tape, approx. 10 cm long.

The strips of adhesive tape should have a distance of approx. 12 cm to the left exterior contour of the headliner (2). Otherwise the left windowbag may be restricted.
Press on strips of adhesive tape firmly, otherwise the emergency call system wiring harness (1) can detach itself from the headliner (2).

Glue strips of adhesive tape to present strips of adhesive tape on the mount for the overhead control panel wiring harness (4).