ar6830p4100sx

Remove/install door sill

Tipo ar · tema 68.30 · versão 0103 · 2012-04-13

Válido para: MODEL 221.0 MODEL 221.1 except CODE (Z07) Top protection

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 3 Carroçaria › 68 Acabamento interno › 68.30 Revestimentos, frisos — Série 221 (modelos 0**, 1**)

EinPAS 37 Acabamento interno › 37.45 Revestimento › 37.45.37 revestimento da área para os pés — Série 221 (modelos 0**, 1**)

AR68.30-P-4100SX

Remove/install door sill

15.3.12

MODEL 221.0

MODEL 221.1 except CODE (Z07) Top protection

Remove/install door sill

P68.30-3628-06

Shown on model 221.0

1 Front door sill molding

2 Rear door sill molding

3 Clips

Remove

1

Insert long wedge from front (arrow) below front entry molding (1) or rear entry molding (2) next to first clip to be released (3), turn 90° toward inside and unclip clip (3) by pressing long wedge upward

*115589035900

2

Continue to insert long wedge next to all other clips (3) on front entry molding (1) or rear entry molding (2) and unclip clip (3) by pressing long wedge upward

*115589035900

3

Pivot front door sill molding (1) or rear door sill molding (2) upward from rear (arrow) and lift out of retaining clips.

Install

4

First insert front door sill molding (1) or rear door sill molding (2) into retaining clips and then clip in toward rear.

Replace clips (3).

Remove/install door sill

Long wedge

115 589 03 59 00