P68.30-2899-02
1 Edge guard
2 Panel
3 Hood release
| Remove/Install | ||
1 | Open front door | ||
2 | Loosen edge guard (1) on A-pillar in area of paneling (2) | Installation: Ensure that edge guard (1) is seated properly. | |
3.1 | Unscrew bolt in area of hood release (3) | Only when removing paneling (2) with hood release (3). | |
4.1 | Unclip paneling (1) and move out of hood release (3) | Only when removing paneling (2) with hood release (3). | |
| |||
4.2 | Unclip paneling (2) and remove | Only when removing paneling (2) without hood release (3). | |
| |||
5 | Install in the reverse order |
Snap-release tool
452 589 01 63 00