251 589 03 23 00
Cutting template
Cutting template
Spot weld milling cutter
Cutting template
201 589 00 51 00
251 589 09 23 00
251 589 11 23 00
Commercially available tools
Number | Designation | |
WH58.30-Z-1006-01A | Vario Drill WS 91 spot weld removing tool | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1022-04A | Cutting disk, dia. 50 mm, 80 m/s (max. 30,600 rpm) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
P65.10-3101-06
1 Expose spot welds in areas A, C, D, E and F and cut out .
2 Cut continuous welds in area B.
3 Mark cutting point in area G and cut
Use cutting template Cut only through one layer.
Shown on model 251 without panoramic glass roof with top sliding roof, code 413 and without power glass tilting/sliding roof, code 414
P65.10-2608-06
4 Expose spot welds in areas H and K and cut out.
5 Mark and cut separation points in areas I and J.
Use cutting template Cut only through one layer.
6 Remove separated parts.
Shown on model 251 without panoramic glass roof with top sliding roof, code 413 and without power glass tilting/sliding roof, code 414
P65.10-3102-09
Shown on model 251 without panoramic glass roof with top sliding roof, code 413 and without power glass tilting/sliding roof, code 414
7 Expose spot welds in areas L, M and O and cut out.
8 Mark and cut separation points in areas N and P.
Use cutting template Cut only through one layer.
9 Remove separated parts.