ar6420p131002ff

Partially prepare rear floor assembly

Tipo ar · tema 64.20 · versão 0101 · 2007-06-18

Válido para: MODEL 454.0

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 3 Carroçaria › 64 Parede traseira e traseira › 64.20 Parte traseira — Série 454 (modelos 0**)

EinPAS 35 Carroçaria/chassi/peças agregadas › 35.31 Parede traseira/traseira › 35.31.30 Parede traseira/traseira — Série 454 (modelos 0**)

AR64.20-P-1310-02FF

Partially prepare rear floor assembly

Partially prepare rear floor assembly

P64.20-3992-12

1 Scribe cut along broken line in area A according to old part of rear floor assembly (1) removed.

The new part must be approx. 2.5 cm longer than the removed old part to achieve a lap joint when installed.

2 Cut along broken line in area A on rear floor assembly (1).

Partially prepare rear floor assembly

P64.20-3991-09

3 Drill holes for plug welding in areas E and F on rear floor assembly section (1.1) and grind mating surfaces down to bare metal on both sides.

4 Grind mating surfaces down to bare metal in areas B to D on rear floor assembly section (1.1) on both sides.