ar6420p130004ff

Install rear floor

Tipo ar · tema 64.20 · versão 0101 · 2007-06-18

Válido para: MODEL 454.0 Beim Erneuern des einzelnen Heckbodens

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 3 Carroçaria › 64 Parede traseira e traseira › 64.20 Parte traseira — Série 454 (modelos 0**)

EinPAS 35 Carroçaria/chassi/peças agregadas › 35.31 Parede traseira/traseira › 35.31.30 Parede traseira/traseira — Série 454 (modelos 0**)

AR64.20-P-1300-04FF

Install rear floor

Install rear floor

P64.20-4286-09

Scope of repair shown on vehicle with left C-pillar completely removed

1 Completely install rear floor assembly (1), fit and fasten to body using vise grip pliers and C-clamps.

2 Bend over floor panel (2) in marked areas (arrows) and fasten to complete rear floor assembly (1) by tack welding

3 Complete rear floor assembly (1) in areas A to C .

Install rear floor

P64.20-4287-09

4 Complete rear floor assembly (1) in area E .

5 Complete rear floor assembly (1), on side of side wall still installed, in area D .

6 Complete rear floor assembly (1), on side of side wall installed, in area F .

Install rear floor

P64.20-4288-05

7 Floor panel (2) in areas G to J .

Weld through inert gas weld in areas G to J. Perform welding in intervals, allow to cool down in between. This ensures minimum heat distortion.

8 Weld inert gas weld down to bare metal in areas G to J.

Grind inert gas weld down flat in areas G to J on floor (2) due to reasons of operational stability and costs

9 Clean all spot welds with wire brush