ar6330p114302ff

Partially prepare longitudinal member inner shell on entrance

Tipo ar · tema 63.30 · versão 0101 · 2007-06-18

Válido para: MODEL 454.0

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 3 Carroçaria › 63 Parede lateral › 63.30 Longarinas externas — Série 454 (modelos 0**)

EinPAS 35 Carroçaria/chassi/peças agregadas › 35.34 Parede lateral › 35.34.41 Suporte/caixa da roda — Série 454 (modelos 0**)

AR63.30-P-1143-02FF

Partially prepare longitudinal member inner shell on entrance

Partially prepare longitudinal member inner shell on entrance

P63.30-2412-06

1 Scribe cut along broken line in area E on longitudinal member inner shell (1) according to old part removed.

2 Cut along broken line in area E on longitudinal member inner shell (1).

3 Grind mating surface down to bare metal in area D on front longitudinal member inner shell section (1.1) on one side.

4 Grind mating surface down to bare metal in area B on front longitudinal member inner shell section (1.1) on one side.

5 Grind mating surface down to bare metal in area C on front longitudinal member inner shell section (1.1) on both sides.

6 Grind mating surface down to bare metal in area A on front longitudinal member inner shell section (1.1) on both sides. Coat insides of spot weld flanges with zinc dust paint.