Commercially available tools
Number | Designation | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1021-04A | Cutting disk, dia. 65 mm, 80 m/s (max. 23,500 rpm) | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
P63.30-2257-07
1 Cut outer longitudinal member shell (1) according to old part removed in area A (dotted line).
2 Cut outer longitudinal member shell (1) along dotted line in area with body saw
P63.30-2260-05
3 Grind connection surfaces down to bare metal in area B on front outer longitudinal member shell (1.1).
4 Grind connection surfaces in areas C to E on front outer longitudinal member shell (1.1) down to bare metal on both sides.