P63.30-2423-09
1 Expose spot welds in areas A and B on center side longitudinal member (1) and cut out.
P63.30-2422-06
2 Expose spot welds in areas C to E on center side longitudinal member (1) and cut out.
3 Remove center side longitudinal member (1) with center side longitudinal member reinforcement.
P63.30-2421-08
4 Grind mating surfaces down to bare metal in areas F and G, on both sides.
P63.30-2420-06
5 Grind connection surfaces down to bare metal in areas H and J, on both sides
6 Grind mating surfaces down to bare metal in areas K to N, on one side.