P63.30-2269-04
1 Expose spot welds in illustrated areas on front side longitudinal member (1) and cut out.
P63.30-2270-09
2 Expose spot welds in illustrated areas on front side longitudinal member (1) and cut out.
3 Remove front side longitudinal member (1).
P63.30-2271-06
4 Grind mating surfaces down to bare metal in areas D and E, on body, on one side.
5 Grind connection surfaces down to bare metal A to C, on body, on both sides.
6 Grind connection surfaces down to bare metal in areas F to J, on both sides. Coat insides of spot weld flanges with zinc dust paint.