ar6320p201103ff

Install and weld in taillamp reinforcement

Tipo ar · tema 63.20 · versão 0101 · 2007-06-13

Válido para: MODEL 454.0

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 3 Carroçaria › 63 Parede lateral › 63.20 Colunas — Série 454 (modelos 0**)

EinPAS 35 Carroçaria/chassi/peças agregadas › 35.34 Parede lateral › 35.34.45 Coluna — Série 454 (modelos 0**)

AR63.20-P-2011-03FF

Install and weld in taillamp reinforcement

Install and weld in taillamp reinforcement

1 Fit rear lamp reinforcement (1) and fasten to body using vise grip pliers and C-clamps.

2 In areas A and B on rear lamp reinforcement (1) .

3 In area C on rear lamp reinforcement (1) .

P63.20-5280-03

Install and weld in taillamp reinforcement

4 In area D on rear lamp reinforcement (1) .

5 Drill through available holes with 4 mm drill in areas E to G.

6 In areas E to H on rear lamp reinforcement (1) .

7 Grind all spot welds down flat if required.

8 Clean all other spot welds with wire brush

P63.20-5281-03