Spot weld milling cutter
201 589 00 51 00
Commercially available tools
Number | Designation | |
WH58.30-Z-1002-01A | Ball cutter, dia. 12 mm | |
WH58.30-Z-1006-01A | Vario Drill WS 91 spot weld removing tool | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1021-04A | Cutting disk, dia. 65 mm, 80 m/s (max. 23,500 rpm) | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
P63.20-4664-09
Dimensions:
a 60 mm
1 Mark cutting line on inner B2-pillar (1) (area A).
2 Cut separation point on inner B2-pillar (1) with body saw (area A).
3 Expose spot welds on inner B2-pillar (1) (areas B and C).
4 Cut out spot welds on inner B2-pillar (1) with spot weld milling cutter or spherical milling cutter
(areas B and C).
Additionally cut out one spot weld each through openings (arrow) from outside.
5 Remove damaged inner B2-pillar (1).
P63.20-4668-06
6 Sand connection surfaces down to bare metal in shaded areas.
Sand spot weld flanges down to bare metal on both sides.
7 Remove grinding and drilling chips using wet/dry vacuum cleaner.
8 Coat insides of spot weld flanges with zinc dust paint.