Commercially available tools
Number | Designation | |
WH58.30-Z-1003-02A | Clamping pliers | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1021-04A | Cutting disk, dia. 65 mm, 80 m/s (max. 23,500 rpm) | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-02A | Inert gas welder |
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
P63.20-4755-09
1 Install partition wall (1), fit and screw on with bolts and nuts (2).
Lightly tighten bolts and nuts (2).
P63.20-4761-09
Dimensions:
a 50 mm
c 600 mm
b 1352 mm
2 Measure partition wall (1) to right and left roof frame (3).
3 Measure partition wall (1) to cross member (8).
4 Measure partition wall (1) to front roof frame (4).
5 Install center bracket (5) and bottom bracket (6) with bolts and nuts (2) and fit.
Tighten bolts and nuts (2).
P63.20-4766-09
6 Tack weld center bracket (5) with (area A).
7 Tack weld bottom bracket (6) with (area B).
8 Weld in bottom bracket (6) on B1-pillar (7) with (area C).
9 Weld in center bracket (5) with (area D).
10 Weld in center bracket (5) with (area E).
11 Weld in center bracket (5) with (area F).