140 589 26 23 00
Check and welding gauges
Multi-Z elements MZ 260
Side portal frame
210 589 17 23 00
220 589 14 23 00
Commercially available tools
Number | Designation | |
WH58.30-Z-1003-01A | Electrode miller | |
WH58.30-Z-1003-02A | Clamping pliers | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1021-04A | Cutting disk, dia. 65 mm, 80 m/s (max. 23,500 rpm) | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-02A | Inert gas welder |
WE58.40-Z-1002-02A | Spot welder |
WE58.40-Z-1004-02A | Stud welder |
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
WE58.40-Z-1001-05A | Two-post lifting platform |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
P63.20-4623-09
1 Install inner B1-pillar (1), align and fasten in place using clamping pliers.
2 Inner B1-pillar (1) (area A).
3 Remove clamping pliers .
4 Install outer side wall (2) with side portal frame, inspection and welding gauges and align and fasten in place using clamping pliers.
With the aid of the outer side wall (2), check installation position of B1-pillar (1).
5 Remove side portal frame and inspection and welding gauges.
6 Remove outer side wall (2)
7 Inner B1-pillar (1) (area B).
8 Inner B1-pillar (1) (areas C, D and arrows).
9 Grind contact surfaces of outer side wall on inner B1-pillar (1).
10 Clean welds with round wire brush.
11 Paint welds with zinc dust paint.
P63.20-4659-09
Dimensions:
b 240 mm
c 40 mm
12 Mark seat of threaded stud (3) on B1-pillar (1).
13 Mount threaded stud (3) using stud welder.
14 Clean weld on inside of inner B1-pillar (1) using a round wire brush.
15 Coat weld with zinc dust paint.