Commercially available tools
Number | Designation | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
P63.20-6768-06
1 Grind mating surfaces down to bare metal in cross-hatched areas A, IA and X on one side.
2 Grind mating surfaces down to bare metal in remaining areas on both sides.
3 Remove grinding and cutting chips with wet/dry vacuum cleaner.
4 Coat insides of spot welding flange (except areas A, DB and X) with zinc dust paint.
P63.20-6769-09
5 Grind mating surfaces down to bare metal in cross-hatched area C on one side.
6 Grind mating surfaces down to bare metal in remaining areas on both sides.
7 Remove grinding and cutting chips with wet/dry vacuum cleaner.
8 Coat insides of spot welding flange (except area C) with zinc dust paint.
P63.20-6770-06
9 Grind mating surfaces down to bare metal in cross-hatched areas B, GA, M and S on one side.
10 Grind mating surfaces down to bare metal in remaining areas on both sides.
11 Remove grinding and cutting chips with wet/dry vacuum cleaner.
12 Coat insides of spot welding flange (except areas B, M and S) with zinc dust paint.