Commercially available tools
Number | Designation | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
P63.20-4578-04
1 Grind mating surfaces down to bare metal in shaded areas F, L, M, P, R and TA.
2 Remove grinding and cutting chips with wet/dry vacuum cleaner.
3 Coat insides of spot welding flange in area R with zinc dust paint.
P63.20-4579-01
4 Grind mating surfaces down to bare metal in area T on both sides.
5 Remove grinding and cutting chips with wet/dry vacuum cleaner.
6 Coat insides of spot welding flange in area T with zinc dust paint.
P63.20-6988-07
7 Grind mating surfaces down to bare metal in areas D, EA and EB on both sides.
8 Grind mating surfaces in remaining shaded areas on both sides.
9 Remove grinding and cutting chips with wet/dry vacuum cleaner.
10 Coat insides of spot welding flange with zinc dust paint in areas D, EA and EB.