If reinforcements or sheet metal panels are replaced below the C-pillar paneling, do not drill holes in mating surfaces in this area accessible from both sides.
Drill required holes later, when fitting and installing.
P63.20-6135-05
1 Scribe cuts on C-pillar paneling (1) according to the old part removed along broken lines in areas A and B.
2 Perform cut on C-pillar paneling (1) in areas A and B on side wall paneling (2).
P63.20-6136-12
3 Grind joints and mating surfaces in areas C and D on C-pillar paneling (1) down to bare metal.
P63.20-6137-12
4 Drill holes for plug welding in illustrated areas on C-pillar paneling (1) and grind mating surfaces down to bare metal on both sides.
P63.20-6138-12
5 Grind mating surfaces in area E down to bare metal on both sides.
6 Drill holes for plug welding in all other illustrated areas on C-pillar paneling (1) and grind mating surfaces down to bare metal on both sides.