ar6310p074503ff

Install side wall paneling bottom member

Tipo ar · tema 63.10 · versão 0101 · 2007-06-14

Válido para: MODEL 454.0 Nur wenn keine darunterliegenden Verstärkungen oder Blechteile erneuert wurden'

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 3 Carroçaria › 63 Parede lateral › 63.10 Parede lateral — Série 454 (modelos 0**)

EinPAS 35 Carroçaria/chassi/peças agregadas › 35.34 Parede lateral › 35.34.35 Para-lama/parede lateral — Série 454 (modelos 0**)

EinPAS 35 Carroçaria/chassi/peças agregadas › 35.34 Parede lateral › 35.34.38 Revestimento de chapa esquerdo — Série 454 (modelos 0**)

EinPAS 35 Carroçaria/chassi/peças agregadas › 35.34 Parede lateral › 35.34.39 Revestimento de chapa direito — Série 454 (modelos 0**)

AR63.10-P-0745-03FF

Install side wall paneling bottom member

Install side wall paneling bottom member

P63.10-3836-09

1 Install lower side wall paneling (1), fit and fasten using vise grip pliers and C-clamps.

2 Lower side wall paneling (1) in illustrated areas .

Install side wall paneling bottom member

P63.10-3837-09

3 Lower side wall paneling (1) in areas A to C .

Weld inert gas welds all the way through in areas A to C. Perform welding in intervals, allow to cool down in between. This ensures minimum heat distortion.

4 Clean inert gas welds down flat in areas A to C and clean with wire brush.

5 Grind all required spot welds down flat.

6 Clean all other spot welds with wire brush.

Install side wall paneling bottom member

P63.10-3838-09

7 Fill unevenness in cross-hatched area illustrated on side wall paneling bottom (1) with filling solder and then grind down flat.