P63.10-3828-06
1 Fit inner C-pillar side wall (1) and fasten to body using vise grip pliers and C-clamps.
2 Inner C-pillar side wall (1) in area A .
P63.10-3829-05
3 Inner C-pillar side wall (1) in area B .
P63.10-3830-06
4 Inner C-pillar side wall (1) in area C .
P63.10-3831-06
5 Striking plate (2) on inner C-pillar side wall (1) in areas D and E .
P63.10-3832-06
6 Drill Ø 4 mm continuous holes in areas F to H on complete rear wheel well (3).
7 Countersink holes with
8 mm bit.
Countersink alternately from inside and outside
Areas not accessible from both sides can also be countersunk continuously on one side.
8 Complete rear wheel well (3) with inner C-pillar side wall (1) in areas F to H .
P63.10-3833-06
9 Drill Ø 4 mm continuous holes in areas J and K on inner C-pillar side wall (1).
10 Countersink holes with
8 mm bit.
Countersink alternately from inside and outside
Areas not accessible from both sides can also be countersunk continuously on one side.
11 Inner C-pillar side wall (1) in areas J and K .
P63.10-3834-11
12 Inner C-pillar side wall (1) in area L .
13 Tack weld Inner C-pillar side wall (1) in areas M and N
Other spot welds required can be completed together with the side wall paneling
P63.10-3835-06
14 Inner C-pillar side wall (1) in area P .
15 Grind all spot welds down flat if required.
16 Clean all other spot welds with wire brush.
Other spot welds required can be completed together with parts located above.