Commercially available tools
Number | Designation | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
P63.10-3951-06
1 Grind mating surfaces down to bare metal in cross-hatched areas A, B, EA, EB and H on one side.
2 Grind mating surfaces down to bare metal in remaining cross-hatched areas on both sides.
3 Remove grinding and cutting chips with wet/dry vacuum cleaner.
4 Coat insides of spot weld flange and rivet flange (except areas A, B and EA) with zinc dust paint.
Shown on model 251 without panoramic glass roof with top sliding roof, code 413 and without power glass tilting/sliding roof, code 414
P63.10-3952-06
5 Grind mating surfaces down to bare metal in cross-hatched areas FB and G on one side.
6 Grind mating surfaces down to bare metal in remaining cross-hatched areas on both sides.
7 Remove grinding and cutting chips with wet/dry vacuum cleaner.
8 Coat insides of spot weld flange (except areas FB and G) with zinc dust paint.
Shown on model 251 without panoramic glass roof with top sliding roof, code 413 and without power glass tilting/sliding roof, code 414