Spot weld milling cutter
201 589 00 51 00
Commercially available tools
Number | Designation | |
WH58.30-Z-1002-01A | Ball cutter, dia. 12 mm | |
WH58.30-Z-1006-01A | Vario Drill WS 91 spot weld removing tool | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1021-04A | Cutting disk, dia. 65 mm, 80 m/s (max. 23,500 rpm) | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
WE58.40-Z-1001-05A | Two-post lifting platform |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
P62.30-2371-09
1 Mark separation point and cut with body saw (area a).
Dimension "a" = approx. 110 mm
2 Expose spot welds and cut out with spot weld milling cutter (area B).
3 Remove section.
4 Expose spot welds and cut out with spot weld milling cutter (areas C, D, E and F).
Cut out spot welds through two sheet metal thicknesses (arrows).
5 Cut out weld (area G).
P62.30-2375-06
6 Expose spot welds and cut out with spot weld milling cutter (areas H, I and J).
P62.30-2380-06
7 Grind mating surfaces down to bare metal in cross-hatched areas. Grind spot weld flanges to bare metal on both sides
8 Remove grinding and drilling chips using wet/dry vacuum cleaner.
9 Coat insides of spot weld flanges with zinc dust paint.