Commercially available tools
Number | Designation | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
P62.25-2371-08
Shown on removed left outer firewall bottom section
1 Grind connection surfaces in areas A to E down to bare metal on both sides.
2 Grind connection surface in area F down to bare metal on one side.
Prepare connection surface in area F on left side, right side or with new parts to be installed depending on damage.
3 Grind connection surface down to bare metal in area G on both sides. Coat insides of spot weld flanges with zinc dust paint.
Prepare connection surface in area G on left side, right side or with new parts to be installed depending on damage.