N60.10-2069-01
N60.10-2068-01
2 Assembly strips
3 Securing bolts
A1 Longitudinal member module
B1 Longitudinal member module
P60.10-2168-09
A1 Longitudinal member module
B1 Longitudinal member module
D Auxiliary member module
C Module members
See also Celette set-up plans for additional information.
The Celette straightening bench is subdivided in the longitudinal direction in the index fields. The index fields are marked with numbers (arrows) at the side straightening bench flange.
The module members (C) can be used on each Celette straightening bench approved by Daimler-Benz.
1 Position longitudinal member module (A1, B1), module members (C) and auxiliary member module (D) on Celette straightening bench.
2 Align longitudinal member modules (A1, B1) according to hole pattern on front straightening bench base plate.
3 Insert mounting screws (3).
4 Connect longitudinal member module (A1, B1) with assembly strips (2).
Align longitudinal member module (A1) and longitudinal member module (B1) parallel to one another with assembly
strips (2).
5 Tighten longitudinal member modules (A1, B1) with mounting screws (3)
6 Remove assembly strips (2).
7 Install module members (C) in index fields 14, 27, 30, 37 and 41.
8 Install auxiliary member module (D) in index field 23.