P46.10-2571-06
1 Bolts
2 Steering column switch module
3 Locking pin
A45 Fanfare horns and airbag clock spring contact
P46.10-2569-09
4 Bolts
5 Cover
A45 Fanfare horns and airbag clock spring contact
N49 Steering angle sensor
N80 Steering column module
6 Cover
7 Steering column switch module paneling
| Remove/install | ||
1 | Remove steering wheel | ||
2 | Remove jacket tube switch module (2) | Installation: Slide steering column switch module (2) complete with clock spring contact (A45) onto steering column tube and screw in mounting screw. | |
3 | Unscrew bolts (1) from steering column switch module (2) | Do not operate locking pin (3) as this is the anti-twist lock of the clock spring contact (A45). | |
4 | Remove paneling (7) of steering column switch module (2) | Installation: Pay attention to correct seating of coverings (5, 6). | |
5 | Unscrew bolts (4) from steering column switch module (2) | ||
6 | Remove clock spring contact (A45) | If the clock spring contact (A45) has been twisted, then it has to be replaced. | |
Installation: When fitting the clock spring contact (A45) check for correct seating of the plug contacts on the steering column module (N80) (arrow). | |||
| Checking | ||
7 | Check the spiral contact coil (A45) for damage | Visual inspection, if necessary replace clock spring contact (A45). | |
8 | Install in the reverse order |
Documentos referenciados
- ar4610p0100tx
- ar5425p280001tx Remover o Módulo do interruptor do tubo da coluna de direção