AR40.20-D-0360B | Inspecting installation position of axles | 18.8.98 |
MODEL 667, 668, 670
mechanical excessive steering angle measurement
| Testing | ||
1 | Position vehicle on a horizontal base | ||
2 | Load the vehicle evenly | The vehicle frame must be horizontal for the test | |
3 | Measure installed position of rear axle | If a difference is found, there may be a difference both in inclined position at the rear axle and a rear axle lateral offset caused by the lateral offset of the frame. | |
4 | Measure installed position of front axle | ||
5 | Adjust installed position of axles | Loosen U-bolt and offset the axle according to the values determined. Check center bolts. |
Telescopic measuring rod
124 589 02 19 00