ar3531p056002b

Knocking out and knocking in clamping sleeve and pinion shaft

Tipo ar · tema 35.31 · versão 0102 · 1998-10-27

Válido para: Rear axle center assembly dia. 168 in MODEL 124.104 up to 30.4.94, 124.105 /106, 124.107 up to 30.4.94, 170.435, 202.180 Rear axle center assembly dia. 168 in MODEL 124.020 /021 /080 /081 /120 /125 /126 /180 /185, 124.186 up to 28.2.94, 201.018 /023 /024 /122 /126, 202.018 /078 /120 /121 /122 /125 /182, 210.003 /004 except CODE (450) Taxi version Rear axle center assembly dia. 168 in MODEL 124.020 /021 /080 /081 /120 /125 /126 /180 /185 /186, 201.018 /023 /024 /122 /126 up to 31.10.88 with CODE (4

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 2 Chassí › 35 Eixo traseiro › 35.31 Parte central do eixo traseiro — Série 124 (modelos 020, 021, 080, 081, 104, 105, 106, 107, 120, 125, 126, 180, 185, 186) · Série 170 (modelos 435) · Série 201 (modelos 018, 023, 024, 122, 126) · Série 202 (modelos 018, 078, 120, 121, 122, 125, 180, 182) · Série 210 (modelos 003, 004)

EinPAS 17 Trem de força/eixo › 17.51 Eixo traseiro › 17.51.65 diferencial do eixo traseiro/diferencial longitudinal — Série 124 (modelos 020, 021, 080, 081, 104, 105, 106, 107, 120, 125, 126, 180, 185, 186) · Série 170 (modelos 435) · Série 201 (modelos 018, 023, 024, 122, 126) · Série 202 (modelos 018, 078, 120, 121, 122, 125, 180, 182) · Série 210 (modelos 003, 004)

AR35.31-P-0560-02B

Knocking out and knocking in clamping sleeve and pinion shaft

Knocking out and knocking in clamping sleeve and pinion shaft

201 589 02 15 00

Drift punch

Knocking out and knocking in clamping sleeve and pinion shaft

P35.31-0299-01

Removal

1 Using a suitable drift, knock clamping sleeve (19) for the differential pin (16) out of the differential housing (13).

2 Using a drift punch, knock differential pin (16) out of differential housing.

Installation

3 Using a punch, drive differential pin (16) into differential housing, paying attention to the bore for the clamping sleeve (19).

4 Drive in clamping sleeve (19) until it sits centrally in the differential pin (16).

Replace clamping sleeve (19).