ar3531p055019b

Mounting ring gear on differential

Tipo ar · tema 35.31 · versão 0106 · 2010-01-12

Válido para: Rear axle center assembly dia. 168 in MODEL 124.104 up to 30.4.94, 124.105 /106, 124.107 up to 30.4.94, 170.435, 202.180 Rear axle center assembly dia. 168 in MODEL 124.020 /021 /080 /081 /120 /125 /126 /180 /185, 124.186 up to 28.2.94, 201.018 /023 /024 /122 /126, 202.018 /078 /120 /121 /122 /125 /182, 210.003 /004 except CODE (450) Taxi version Rear axle center assembly dia. 168 in MODEL 124.020 /021 /080 /081 /120 /125 /126 /180 /185 /186, 201.018 /023 /024 /122 /126 up to 31.10.88 with CODE (4

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 2 Chassí › 35 Eixo traseiro › 35.31 Parte central do eixo traseiro — Série 124 (modelos 020, 021, 080, 081, 104, 105, 106, 107, 120, 125, 126, 180, 185, 186) · Série 170 (modelos 435) · Série 201 (modelos 018, 023, 024, 122, 126) · Série 202 (modelos 018, 078, 120, 121, 122, 125, 180, 182) · Série 210 (modelos 003, 004)

EinPAS 17 Trem de força/eixo › 17.51 Eixo traseiro › 17.51.65 diferencial do eixo traseiro/diferencial longitudinal — Série 124 (modelos 020, 021, 080, 081, 104, 105, 106, 107, 120, 125, 126, 180, 185, 186) · Série 170 (modelos 435) · Série 201 (modelos 018, 023, 024, 122, 126) · Série 202 (modelos 018, 078, 120, 121, 122, 125, 180, 182) · Série 210 (modelos 003, 004)

AR35.31-P-0550-19B

Mounting ring gear on differential

Tightening torque of ring gear bolts reduced

Models 124, 201 as of 01.02.87

BT35.31-P-0005-01A

Check values for rear axle center assembly gear set

Number

Designation

Model 124

Model 170

Model 201

BE35.31-P-1003-03A

Ring gear heating temperature for installation

°C

75-85

75-85

75-85

Check values for rear axle center assembly gear set

Number

Designation

Model 202

Model 210

BE35.31-P-1003-03A

Ring gear heating temperature for installation

°C

75-85

75-85

Ring gear for rear axle center assembly

Number

Designation

Models 124.020/021/
080/081/120/
125/126/180/185,
except (code 450)
taxi version

Models 124.020/021/
080/081/120/
125/126/180/
185/186,
with (code 450)
taxi version
up to 31.10.88

Models 124.104/107
up to 30.04.94,
Models 124.105/106,
Model 124.186
up to 28.02.94,
except (code 450)
taxi version

Model 170.435

BA35.31-P-1001-03B

Locking bolt, ring gear to differential case

Nm

85

85

85

85

Ring gear for rear axle center assembly

Number

Designation

Models 201.018/023/
024/122/126,
except (code 450) taxi version

Models
201.018/023/
024/122/126,
with (code 450) taxi version up to 31.10.88

Model 202.018/078/120/
121/122/125/182, except (code 450)
taxi version,
Model 202.018/120/121/125
without ASD (code 211),
Model 202.180

BA35.31-P-1001-03B

Locking bolt, ring gear to differential case

Nm

85

85

85

Ring gear for rear axle center assembly

Number

Designation

Models 210.003/004
except (code 450)
taxi version

BA35.31-P-1001-03B

Locking bolt, ring gear to differential case

Nm

85

Mounting ring gear on differential
Mounting ring gear on differential

124 589 07 21 00

201 589 01 15 00

Spring compressor

Remote thermometer

Mounting ring gear on differential

P35.31-0282-01

1 Carefully clean ring gear bore and ring gear seat on differential case.

2 Heat ring gear (47a) to installation temperature using hotplate (080), checking the temperature constantly with the remote thermometer (070).

Mounting ring gear on differential

P35.31-0391-01

3 Clamp differential case with assembly arbor (046).

4 Mount ring gear (47a) on differential case, apply gentle blows from a hammer (rubber hammer) if necessary.

Pay attention to any markings (arrow) on the ring gear and differential case.

Mounting ring gear on differential

P35.31-0392-01

5 Tighten retaining bolts with serrated washers (13a) for securing the ring gear (47a) evenly and in a cross pattern.

Always replace ring gear bolts (13a) after single use.

Documentos referenciados