ar3531p055014b

Pulling tapered roller bearing outer races into rear axle housing

Tipo ar · tema 35.31 · versão 0102 · 1998-10-27

Válido para: Rear axle center assembly dia. 168 in MODEL 124.104 up to 30.4.94, 124.105 /106, 124.107 up to 30.4.94, 170.435, 202.180 Rear axle center assembly dia. 168 in MODEL 124.020 /021 /080 /081 /120 /125 /126 /180 /185, 124.186 up to 28.2.94, 201.018 /023 /024 /122 /126, 202.018 /078 /120 /121 /122 /125 /182, 210.003 /004 except CODE (450) Taxi version Rear axle center assembly dia. 168 in MODEL 124.020 /021 /080 /081 /120 /125 /126 /180 /185 /186, 201.018 /023 /024 /122 /126 up to 31.10.88 with CODE (4

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 2 Chassí › 35 Eixo traseiro › 35.31 Parte central do eixo traseiro — Série 124 (modelos 020, 021, 080, 081, 104, 105, 106, 107, 120, 125, 126, 180, 185, 186) · Série 170 (modelos 435) · Série 201 (modelos 018, 023, 024, 122, 126) · Série 202 (modelos 018, 078, 120, 121, 122, 125, 180, 182) · Série 210 (modelos 003, 004)

EinPAS 17 Trem de força/eixo › 17.51 Eixo traseiro › 17.51.65 diferencial do eixo traseiro/diferencial longitudinal — Série 124 (modelos 020, 021, 080, 081, 104, 105, 106, 107, 120, 125, 126, 180, 185, 186) · Série 170 (modelos 435) · Série 201 (modelos 018, 023, 024, 122, 126) · Série 202 (modelos 018, 078, 120, 121, 122, 125, 180, 182) · Série 210 (modelos 003, 004)

AR35.31-P-0550-14B

Pulling tapered roller bearing outer races into rear axle housing

201 589 00 43 00

Pulling-in device

P35.31-0368-02

Draw outer races of front (43e) and rear (46b) tapered roller bearing in up to the stop in the rear axle housing using the pulling-in device (060a-d).



Ensure that the shim (45) is installed.

Do not tilt the tapered roller bearing outer races when drawing them in.

060a Threaded shaft with hexagon

060b Axial needle bearing

060c Small pulling disk

060d Large pulling disk

43e Tapered roller bearing outer race, front

45 Shim

46b Tapered roller bearing outer race, rear