ar3531p055010b

Removing tapered roller bearing inner race from drive pinion

Tipo ar · tema 35.31 · versão 0102 · 1998-10-27

Válido para: Rear axle center assembly dia. 168 in MODEL 124.104 up to 30.4.94, 124.105 /106, 124.107 up to 30.4.94, 170.435, 202.180 Rear axle center assembly dia. 168 in MODEL 124.020 /021 /080 /081 /120 /125 /126 /180 /185, 124.186 up to 28.2.94, 201.018 /023 /024 /122 /126, 202.018 /078 /120 /121 /122 /125 /182, 210.003 /004 except CODE (450) Taxi version Rear axle center assembly dia. 168 in MODEL 124.020 /021 /080 /081 /120 /125 /126 /180 /185 /186, 201.018 /023 /024 /122 /126 up to 31.10.88 with CODE (4

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 2 Chassí › 35 Eixo traseiro › 35.31 Parte central do eixo traseiro — Série 124 (modelos 020, 021, 080, 081, 104, 105, 106, 107, 120, 125, 126, 180, 185, 186) · Série 170 (modelos 435) · Série 201 (modelos 018, 023, 024, 122, 126) · Série 202 (modelos 018, 078, 120, 121, 122, 125, 180, 182) · Série 210 (modelos 003, 004)

EinPAS 17 Trem de força/eixo › 17.51 Eixo traseiro › 17.51.65 diferencial do eixo traseiro/diferencial longitudinal — Série 124 (modelos 020, 021, 080, 081, 104, 105, 106, 107, 120, 125, 126, 180, 185, 186) · Série 170 (modelos 435) · Série 201 (modelos 018, 023, 024, 122, 126) · Série 202 (modelos 018, 078, 120, 121, 122, 125, 180, 182) · Série 210 (modelos 003, 004)

AR35.31-P-0550-10B

Removing tapered roller bearing inner race from drive pinion

Removing tapered roller bearing inner race from drive pinion
Removing tapered roller bearing inner race from drive pinion
Removing tapered roller bearing inner race from drive pinion
Removing tapered roller bearing inner race from drive pinion

201 589 02 34 00

140 589 00 01 00

001 589 50 33 00

000 589 63 34 00

Collet

Extension

Puller

Open-end

Removing tapered roller bearing inner race from drive pinion

P35.31-0258-01

1 Assemble puller basic unit (024) with extension (024c) and collet (024a) and tighten. If necessary, use open-end wrench to assemble or disassemble the extension.

Removing tapered roller bearing inner race from drive pinion

P35.31-0259-01

2 Push puller (024) with collet (024a) over the tapered roller bearing inner race and securely clamp behind the rollers (arrow) using roll pin (024b).

3 Pull off and remove tapered roller bearing inner race from drive pinion (47) using the puller (024).