ar3531p052003tx

Check rear axle differential oil level, correct if necessary

Tipo ar · tema 35.31 · versão 0201 · 2007-05-02

Válido para: Rear axle center assembly dia. 198 in MODEL 219.3 Rear axle center assembly dia. 200 in MODEL 219.3 Rear axle center assembly dia. 215 in MODEL 219.3

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 2 Chassí › 35 Eixo traseiro › 35.31 Parte central do eixo traseiro — Série 219 (modelos 3**)

EinPAS 17 Trem de força/eixo › 17.51 Eixo traseiro › 17.51.65 diferencial do eixo traseiro/diferencial longitudinal — Série 219 (modelos 3**)

AR35.31-P-0520-03TX

Check rear axle differential oil level, correct if necessary

Modification notes

10.8.06

Filling capacity, Specifications for Operating Fluids

Model 219.376/377

*BF35.31-P-1003-01P

Rear axle center assembly housing

Number

Designation

Model
219

BA35.31-P-1002-02D

Oil filler screw, rear axle differential

Nm

50

Rear axle differential

Number

Designation

Model
219 except 219.376/377

Model
219.376/377

BF35.31-P-1003-01P

Filling capacity

Rear differential assembly dia. 215 mm

Liters

1.2

1.2

Specifications for Operating Fluids

Sheet

BB00.40-P-0235-07A

BB00.40-P-0235-61A

BF35.31-P-1004-01P

Filling capacity

Rear axle differential dia. 198 mm

Liters

1.1

-

Specifications for Operating Fluids

Sheet

BB00.40-P-0235-07A

-

BF35.31-P-1005-01P

Filling capacity

Rear axle center assembly dia. 200 mm

Liters

1.1

-

Specifications for Operating Fluids

Sheet

BB00.40-P-0235-07A

-

Repair materials

Number

Designation

Order number

BR00.45-Z-1061-01A

Sealant, Omnifit 100H (50 g)

A 002 989 23 71

BR00.45-Z-1046-04A

Cleaning spray, Loctite 7063 (150ml)

A 001 986 71 71 10

Check rear axle differential oil level, correct if necessary

P35.31-2007-02

Check oil level at room temperature only and not when rear axle differential is warm. Oil which is otherwise needed might flow out when the rear axle center assembly is hot.

1 Clean area around oil filler screw (50 g).

2 Remove oil filler screw (50 g)

Replace oil filler screw (50g).

3 If necessary collect oil running out and allow to run out until oil only drips out of opening.

Shown on 198 mm dia. rear axle center assembly

50g Oil filler plug

50h Oil drain screw

4 Check oil level.

The rear axle center assembly is not filled properly if the oil reaches the upper edge of the oil filler hole. If necessary refill with hypoid gear oil.

A mixture of old and new hypoid gear oil would not affect the basic functions on the rear axle gear such as wear resistance, leak tightness etc. A premixing however should be avoided because of the fuel-economy behavior.

Check rear axle differential oil level, correct if necessary

P35.31-2158-01

5 Apply Loctite 7063 cleaning spray to a rag and clean the new oil filler screw and tapped hole in the rear axle center assembly.

The oil filler screw and threaded hole must be free from oil and grease.

6 Apply about one droplet of Omnifit 100H sealing compound on the second or third lower thread.

7 Immediately screw oil filler screw into rear axle center assembly and tighten .