210 589 03 43 00
210 589 01 40 00
Bracket
Extraction and insertion tool
P35.30-0234-01
Rear axle shaft with forged center (without core hole drill hole)
Pressing out
1 Screw nut onto threaded bolt.
2 Screw threaded bolt into threaded spindle of extraction and insertion tool and tighten.
3 Push out rear axle shaft using extraction and insertion tool and remove.
Inserting
On rear axle shafts which are glued in before installation clean the splined shaft profile and rear axle shaft flange mechanically. If the shaft is stiff, cut an M8 thread into the shaft so that this can be pulled in with the extractor and insertion tool .
P35.30-0233-01
4 Screw the bracket (039) onto the shaft journal of the rear axle shaft (37) and clamp in vise.
37 Rear axle shaft
039 Bracket
039a Drilling bush with 4 mm dia. (removable)
039b 8 mm dia. drill and thread cutting bush (fixed) for rear axle shaft with M241.5 thread
Shown on rear axle shaft with M241.5 thread
P35.30-0232-01
5 Insert 4 mm dia. drilling bush (removable) (039a) and lock with mounting bolt (039c).
039a Drilling bush with 4 mm dia. (removable)
039c Mounting screw
039d 8 mm dia. drill and thread cutting bush (fixed) for rear axle shaft with M261.5 thread
Shown on rear axle shaft with M241.5 thread
P35.30-0236-01
6 Drill core hole bore to a depth of approx. 20 mm using a 4 mm dia. drill bit, cooling and lubricating the drill bit in the process.
7 Remove drilling bush with 4 mm dia. (detachable) (039a) with mounting screw (039c).
8 Drill core hole bore to a depth of approx. 20 mm with a 6.8 mm dia.drill bit, cooling and lubricating the drill bit in the process.
P35.30-0251-01
9 Precut thread M8 using a stage 1 and 2 tap.
10 Unscrew bracket (039) from rear axle shaft and clamp rear axle shaft in vise.
11 Finish cutting M8 threads with stage 3 tap.
12 Using the extraction and insertion tool , draw the rear axle shaft into the rear axle shaft flange.