AR33.20-S-1452-01EV | Remove/install rubber bushing on transverse control arm | ||
Danger! | Risk of injury caused by rubber mounts and bearing parts coming loose during installation/removal and shooting wildly through the air | Shield hazard area with suitable catch device (basket, grate box). Also ensure that no unauthorized persons are present in the hazard area. |
Press-in/out tool
730 589 00 43 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1032-06A | Antifriction agent | A 000 989 08 60 |
S35.20-4500-02
Removing
1 Position transverse control arm with sleeve (3) and drift (1) in the workshop press.
2 Press rubber mount (4) out of transverse control arm.
S35.20-4501-02
Install
3 Clean bearing seat of rubber mount (4) in transverse control arm and check for wear and damage.
If necessary, replace transverse control arm.
4 Coat new rubber mount (4) and bearing seat of rubber mount (4) in transverse control arm with lubricant.
5 Position transverse control arm with sleeve (2), rubber mount (4) and drift (1) into workshop press.
6 Press rubber mount (4) into transverse control arm. Finally, check seat of rubber mount (4) in transverse control arm, if necessary, press rubber mount (4) further in.
Documentos referenciados
- as0000z001401a Perigo de lesão pelo mancal elastomérico ou mancais que soltam-se aos golpes no processo de remoção e instalação e assim peças incontrolavelmente lançadas