ar3320p0425d

Checking supporting joint and follower joint of steering knuckle mount (removed)

Tipo ar · tema 33.20 · versão 0102 · 1999-09-22

Válido para: MODEL 210.08 /28

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 2 Chassí › 33 Eixo dianteiro › 33.20 Centralizador de roda, cubo — Série 210 (modelos 08*, 28*)

EinPAS 17 Trem de força/eixo › 17.50 Eixo dianteiro › 17.50.42 Manga de eixo/cubo da roda/rolamento da roda — Série 210 (modelos 08*, 28*)

AR33.20-P-0425D

Checking supporting joint and follower joint of steering knuckle mount (removed)

2.9.96

MODEL 210.08 /28

Checking supporting joint and follower joint of steering knuckle mount (removed)
Checking supporting joint and follower joint of steering knuckle mount (removed)

P33.20-0349-01

P33.20-0350-01

Removal

1

Remove supporting joint (7)

AR33.20-P-0440D

2

Remove upper wishbone (6)

AR33.20-P-0500D

Checking

3

Move ball pin in all directions with an approx. 150 mm tube to check ball pin of supporting joint (7) and follower joint (8).

It must be possible to move the ball pin without any play, without jamming and creaking noises, replace supporting joint or upper wishbone if necessary after checking.

4

Check rubber boot (7f, 8f) for cracks and damage

Replace supporting joint or upper wishbone if necessary after checking.

Installation

5

Install supporting joint (7)

AR33.20-P-0440D

6

Install upper wishbone (6)

AR33.20-P-0500D

Documentos referenciados