ar3012p3022gr

Removing and installing firewall pivot point with accelerator pedal lever

Tipo ar · tema 30.12 · versão 0103 · 2004-07-27

Válido para: ENGINE 112.945 in MODEL 463.244 /245 /250 ENGINE 113.962 in MODEL 463.247 /248 /249 /254 ENGINE 612.965 in MODEL 463.322 /323 ENGINE 628.962 in MODEL 463.309 /332 /333 ENGINE 113.982 in MODEL 463.243 /246 ENGINE 113.993 in MODEL 463.270 /271

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 1 Motor › 30 Aceleração, instalação de controle de velocidade › 30.12 Regulagem - por parte do chassí — Série 463 (modelos 243, 244, 245, 246, 247, 248, 249, 250, 254, 270, 271, 309, 322, 323, 332, 333) · Série 628 (modelos 962)

EinPAS 15 Motor › 15.45 Unidade de controle do motor › 15.45.35 Controle do motor — Série 463 (modelos 243, 244, 245, 246, 247, 248, 249, 250, 254, 270, 271, 309, 322, 323, 332, 333) · Série 628 (modelos 962)

Também válido para motores/caixas de velocidades: 112 945, 113 962, 113 982, 113 993, 612 965

AR30.12-P-3022GR

Removing and installing firewall pivot point with accelerator pedal lever

5.4.01

ENGINE 112.945 in MODEL 463.244 /245 /250

ENGINE 113.962 in MODEL 463.247 /248 /249 /254

ENGINE 612.965 in MODEL 463.322 /323

ENGINE 628.962 in MODEL 463.309 /332 /333

ENGINE 113.982 in MODEL 463.243 /246

ENGINE 113.993 in MODEL 463.270 /271

Removing and installing firewall pivot point with accelerator pedal lever

P30.12-2006-09

1 Cover below instrument panel

2 Accelerator pedal

3 Spring

7 Accelerator pedal lever

8 Locking pin

9 Circlip

4 Screw

5 Circlip

6 Firewall pivot point

Removal/installation

1

Remove cover under instrument panel (1)

Only remove left side. The ignition must be switched off.

AR68.10-P-1500GM

2

Remove accelerator pedal (2)

AR30.12-P-1321GR

3

Remove front floor covering

4

Remove spring (3)

5

Unscrew bolts (4) of firewall pivot point (6)

6

Remove locking ring (5)

7

Remove firewall pivot point (6) with accelerator pedal lever (7)

Installation: The locking pin (8) must engage in the bore in the firewall.

8

Pull firewall pivot point (6) off accelerator pedal lever (7)

by detaching the circlip (9).

9

Install in the reverse order

Documentos referenciados