ar2520p0180ff

Remove/install central clutch operator

Tipo ar · tema 25.20 · versão 0100 · 2007-07-09

Válido para: MODEL 454.0 with TRANSMISSION 717.4

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 2 Chassí › 25 Embreagem › 25.20 Acionamento da embreagem — Série 454 (modelos 0**)

EinPAS 17 Trem de força/eixo › 17.15 Embreagem › 17.15.5 Acionamento da embreagem — Série 454 (modelos 0**)

Também válido para motores/caixas de velocidades: 717 4**

AR25.20-P-0180FF

Remove/install central clutch operator

27.6.07

MODEL 454.0 with TRANSMISSION 717.4

Remove/install central clutch operator

P26.00-2119-09

1 Screw

2 Front section of transmission housing

5 Guide

6 Spring

3 Central clutch release bearing

4 Release bearing

Remove/install

1

Remove transmission

Transmission 717.478

AR26.10-P-0020FB

Transmission 717.470/471/474

AR26.10-P-0020FF

Transmissions 717.473/475

AR26.10-P-0020FG

2

Remove bolts (1)

3

Unclip spring (6) from bolt (arrow) on transmission housing front section (2)

4

Remove central clutch release bearing (3) with spring (6), guide (5) and clutch release bearing (4)

Observe installation position of clutch release bearing (4).

Installation: Check clutch bearing (4) for noise, rough running, leakage and wear and replace entire central clutch release bearing (3) if necessary.

Ensure that the clutch release bearing (4) and spring (6) are positioned and clipped in correctly on the central clutch release bearing (3).

5

Install in the reverse order

Documentos referenciados