EinPAS 15 Motor › 15.15 Motor de combustão interna completo/carcaça do motor/órgãos móveis › 15.15.20 Suspensão do motor — Série 639 (modelos 603, 703)
EinPAS 17 Trem de força/eixo › 17.50 Eixo dianteiro › 17.50.50 Carcaça/tubo suporte/ponte/suporte/tubo de empuxo — Série 639 (modelos 603, 703)
Também válido para motores/caixas de velocidades: 780 994
AR22.20-S-0010-01EV
Unfasten, fasten major assembly carrier for removal of axle/engine subframe
Axle/engine subframe
Number
Designation
Model 639.603/703 with engine 780.994
BA31.35-N-1003-01B
Screw/bolt, major assembly carrier to axle/engine subframe
M12
Nm
111
S22.20-4500-06
1 Unfasten major assembly carrier (2) at the rear from axle/engine subframe (3).
To do this unfasten rear screw/bolts (1) from above through the engine compartment using a socket wrench and extension, then remove.
Installation: Tighten down rear screw/bolts (1) and front screw/bolts. Pay attention to tightening torque.
S22.20-4501-06
2 Unfasten major assembly carrier (2) at the front from axle/engine subframe (3).
To do this unfasten front screw/bolts (4) from above through the engine compartment using a socket wrench and extension, then remove.
Installation: Only screw in from screw/bolts (4) finger-tight.
