S22.10-4508-09
4 Screw
5 Engine support
8 Anti-twist lock
9 Anti-twist lock
6 Engine mount
7 Nut
Modification notes
| Remove/install | ||
Danger! | Risk of injury caused by moving parts that can pinch, crush or, in extreme cases, even sever extremities | No parts of the body or limbs should be within the operating range of the mechanism when moving components. | |
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | |
1 | Remove air filter housing | ||
2 | Put on engine support clamp | Do not lift engine yet. | |
| |||
Engine hoist | |||
Strut | |||
3 | Remove bolt (4) on the left | | |
4 | Raise vehicle | ||
5 | Detach rear lower engine compartment paneling | Only model 636, Model 639.7/8 as of vehicle identification number (VIN) 055347 | |
6 | Remove bolt (4) on the right | | |
7 | Lower vehicle | ||
8 | Raise engine | Raise engine carefully to avoid damage to engine, body and viscous fan. | |
Installation: Observe correct seating of the engine mount (6). The anti-twist lock (8) must sit in the planned cutout at engine support (5). | |||
9 | Raise vehicle | ||
10 | Remove engine mount (6) downwards | Unscrew nuts (7) to do this. | |
Installation: Install new nut (7). Pay attention to correct seating of engine mount (6). The anti-twist lock (9) sit in the planned cutout on axle/engine subframe. | |||
| |||
11 | Install in the reverse order |
Engine mounts, engine supports
Number | Designation | Engine | ||
BA22.10-N-1001-01O | Bolt connecting front engine mount to engine support | Nm | 58 | |
BA22.10-N-1007-01O | Nut, front engine mount to axle carrier | Nm | 58 | |
Crossmember and front reinforcement
Number | Designation | Model | ||
BA62.30-N-1006-01A | Bolt, frame to front module reinforcement | M8 | Nm | 25 |
639 589 01 63 00
Strut
Engine lifting fixture
639 589 00 61 00
Documentos referenciados
- ar0060s1000s Suspender o veículo e colocar sobre os cavaletes
- ar0910s1150s Remover e instalar a carcaça do filtro de ar
- ar3310s010001s Posicionar o arco de sustentação do motor, erguer o motor
- ar6120s110503s
- as0000z000901a Risco de lesão através de aprisionamento ou esmagamento, em casos extremos, seccionamento de membros ao tocar partes mecânicas
- as0000z001001a Perigo de vida pelo escorregamento ou tombamento do veículo do elevador