Disassemble, assemble oil-water heat exchanger

Tipo ar · tema 18.30 · versão 0111 · 2006-02-02

Válido para: ENGINE 904.904 in MODEL 670 ENGINE 904.908 /914 /923 /936 in MODEL 668, 670

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 1 Motor › 18 Lubrificação do motor, arrefecimento do óleo do motor › 18.30 Refrigeração do óleo — Série 668 · Série 670 · Série 904 (modelos 904, 908, 914, 923, 936)

EinPAS 15 Motor › 15.20 Sistema de lubrificação do motor › 15.20.31 Filtro/arrefecimento/termostato/ventilador/reservatório — Série 668 · Série 670 · Série 904 (modelos 904, 908, 914, 923, 936)

AR18.30-D-6840-02D

Disassemble, assemble oil-water heat exchanger

 Oil cooling system

Number	Designation		Engines 900.9, 902.9, 904.9, 906.9


BA18.30-N-1002-01C	Bolt, housing cover to oil-water heat exchanger	Nm	25

Disassemble, assemble oil-water heat exchanger

D18.30-0051-01

1 Unscrew bolt (1.1) at oil-water heat exchanger and take housing cover (1.2) off the heat exchanger (1.3).

 Installation: When tightening the bolt (1.1), ensure that the housing cover (1.2) and the gasket (1.4) do not shift.
If possible, do not tighten bolt (1.1) fully until after fitting on the oil-water heat exchanger.

 Pay attention to tightening torque.

2 Take gasket (1.4) out of the housing cover (1.2).

 Installation: Replace gasket (1.4), note installation position.

3 Assemble in the reverse order.