ar1322d1202nb

Remove/install poly V-belt

Tipo ar · tema 13.22 · versão 0101 · 2004-07-28

Válido para: ENGINE 647.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 ENGINE 647.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada ENGINE 647.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA ENGINE 647.981 in MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 1 Motor › 13 Compressor, acionamentos por correia › 13.22 Acionamento por correia única — Série 647 (modelos 981) · Série 903 (modelos 61*, 62*, 66*, 67*) · Série 904 (modelos 61*, 62*, 66*)

EinPAS 15 Motor › 15.18 Acionamento por correia › 15.18.30 Correia/polia/dispositivo tensor da correia/polia inversora — Série 647 (modelos 981) · Série 903 (modelos 61*, 62*, 66*, 67*) · Série 904 (modelos 61*, 62*, 66*)

AR13.22-D-1202NB

Remove/install poly V-belt

19.8.03

ENGINE 647.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

ENGINE 647.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada

ENGINE 647.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA

ENGINE 647.981 in MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

Remove/install poly V-belt

D13.22-1103-11

Shown for engine without (H08) high-performance AC system code

1 Poly-V-belt

2 Tensioning pulley

3 Tensioning device

Remove

1.1

Remove V-belt

Only with (H08) AC system code

AR13.21-D-0100NB

2

Loosen poly-V-belt (1)

AR13.22-D-3902-01NA

3

Remove poly-V belt (1) from the top

The poly-V belt (1) must not be threaded through the fan.

Check

4

Check poly-V belt (1) and replace if required

For typical damage patterns cf.:

Damage patterns for poly V-belt (1)

AP13.22-D-1351-01A

Install

5

Fit on poly V-belt (1)

Insert poly-V belt (1) starting at the tensioning pulley (2) and the power steering pump.

Refer to:

Running diagram of poly-V-belt (1)

AR13.22-D-3902-02A

6

Tension poly V-belt (1)

AR13.22-D-3902-04NA

7.1

Install V-belt

Only with (H08) AC system code

AR13.21-D-0100NB

Documentos referenciados