ar0110s0110a

Cranking engine with starter

Tipo ar · tema 01.10 · versão 0101 · 2011-02-22

Válido para: ENGINE 611.980 in MODEL 638.094 /194 /294 with CODE (MQ4) Engine OM611 DE22 LA (75 kW) with CODE (MQ5) Engine OM611 DE22 LA (90 kW) ENGINE 611.980 in MODEL 638.094 /194 with CODE (MQ3) Engine OM611 DE22 A (60 kW)

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 1 Motor › 01 Motor completo, respiro do motor, cabeçote, bloco do motor › 01.10 Motor completo — Série 611 (modelos 980) · Série 638 (modelos 094, 194, 294)

EinPAS 15 Motor › 15.15 Motor de combustão interna completo/carcaça do motor/órgãos móveis › 15.15.15 Motor de combustão interna completo — Série 611 (modelos 980) · Série 638 (modelos 094, 194, 294)

AR01.10-S-0110A

Cranking engine with starter

10.2.11

ENGINE 611.980 in MODEL 638.094 /194 /294
with CODE (MQ4) Engine OM611 DE22 LA (75 kW)
with CODE (MQ5) Engine OM611 DE22 LA (90 kW)

ENGINE 611.980 in MODEL 638.094 /194 with CODE (MQ3) Engine OM611 DE22 A (60 kW)

Cranking engine with starter

S01.10-2517-06

1 Compression recorder

2 Contact switch

S53 Ignition/starter switch

Y74 Pressure control valve

Removing, installing

1

Withdraw ignition key

2

Separate plug connection at pressure control valve (Y74)

Precautionary measure so that no fuel is injected

3

Connect compression recorder (1)

Only connect electric cables

AR01.10-S-0010-01C

*001589762100

*201589009900

Danger!

Risk of accident as a result of vehicle starting off when engine running. Risk of injury as a result of bruises and burns if you insert your hands into engine when it is being started or when it is running.

Secure vehicle to prevent it starting off.

Wear closed and close-fitting work clothes.

Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

4

Crank engine

Press contact switch (2) of the compression recorder (1) for this step.

Do not crank engine at the ignition/starter switch (S53).

*001589762100

*201589009900

5

Read fault memory, erase

Stored faults which may be caused by disconnecting cables or by simulation during removal and installation or test work, have to be processed and erased in the fault memories after completing the work. See

Diagnosis Manual Diesel Engine Volume 1.2

6

Install in the reverse order

Cranking engine with starter
Cranking engine with starter

201 589 00 99 00

001 589 76 21 00

Compression recorder

Electrical connection set

Documentos referenciados